EN 
DE 
FR 
PT Buscar
Criterios de Búsqueda
Productos que cumplen las condiciones de búsqueda
PAQUETES DE INICIO ECONÓMICOS (150-25-6-3)
PACKS DE INICIO DE PIEDRAS DE DIAMANTE Y CBN, RESINA Y BONOS METÁLICOS
Solución de bajo costo pero de primera calidad para afiladores novatos. El espacio en blanco es más delgado, los bordes no están biselados, el empaque es modesto y necesita preparación.
Las piedras están grabadas con la palabra “Premium” para demostrar que los nombres “premium”, “élite” o “profesional” pueden colocarse incluso en productos tan modestos como estos.
Longitud: 150 mm = 6 pulgadas
Ancho: 25 mm = 1 pulgada
Altura CBN: 3 mm = 0,1 pulgadas
Altura total (con espacio en blanco): 6 mm = 0,2 pulgadas
Paquete de inicio # 1, 3 piedras CBN, aglomerante de resina
50/40μ = 270/325 = D54 - molienda fina
20/14μ = 1100 = M20 - pulido
7/5μ = 3000 = M6.3 - pulido
Paquete de inicio # 2, 4 piedras CBN, enlace de metal y resina
100/80μ = 140/170 = D107, aglomerante metálico - rectificado fino
50/40μ = 270/325 = D54, aglomerante de resina - rectificado fino
20/14μ = 1100 = M20, aglomerante de resina - pulido
7/5μ = 3000 = M6.3, aglomerante de resina - pulido
Paquete de inicio # 3, 5 piedras CBN, enlace de metal y resina
100/80 μ = 140/170 = D107, aglomerante metálico, rectificado fino
50/40μ = 270/325 = D54 - molienda fina
20/14μ = 1100 = M20, aglomerante de resina - pulido
10/7μ = 1700 = M10, aglomerante de resina - pulido
5/3μ = 4000 = M4, aglomerante de resina - pulido
Paquete de inicio # 4, 6 piedras CBN, enlace de metal y resina
200/160 μ = 70/80 = D213, aglomerante de metal, afilado/amolado basto
100/80μ = 140/170 = D107, aglomerante metálico - rectificado fino
50/40μ = 270/325 = D54, aglomerante de resina - rectificado fino
20/14μ = 1100 = M20, aglomerante de resina - pulido
10/7μ = 1700 = M10, aglomerante de resina - pulido
5/3μ = 4000 = M4, aglomerante de resina - pulido
Paquete de inicio # 5, 3 piedras de diamante, enlace de resina
50/40μ = 270/325 = D54 - molienda fina
20/14μ = 1100 = M20 - pulido
7/5μ = 3000 = M6.3 - pulido
Paquete de inicio # 6, 4 piedras de diamante, enlace de resina
100/80μ = 140/170 = D107 - molienda fina
50/40μ = 270/325 = D54 - molienda fina
20/14μ = 1100 = M20 - pulido
7/5μ = 3000 = M6.3 - pulido
Paquete de inicio # 7, 4 piedras de diamante y CBN, enlace de metal y resina
100/80μ = 140/170 = D107, CBN, aglomerante metálico - rectificado fino
50/40μ = 270/325 = D54, diamante, aglomerante de resina - rectificado fino
20/14μ = 1100 = M20, diamante, aglomerante de resina - pulido
7/5μ = 3000 = M6.3, diamante, aglomerante de resina - pulido
Paquete de inicio # 8, 5 CBN y piedras de diamante, enlaces de metal y resina
100/80μ = 140/170 = D107, CBN, aglomerante metálico - rectificado fino
50/40μ = 270/325 = D54, aglomerante de resina - rectificado fino
20/14μ = 1100 = M20, diamante, aglomerante de resina - pulido
10/7μ = 1700 = M10, diamante, aglomerante de resina - pulido
5/3μ = 4000 = M4, diamante, aglomerante de resina - pulido
Paquete de inicio # 9, 6 piedras CBN, enlace de metal y resina
200/160 μ = 70/80 = D213, CBN, aglomerante metálico, afilado/desbastado
100/80μ = 140/170 = D107, CBN, aglomerante metálico - rectificado fino
50/40μ = 270/325 = D54, diamante, aglomerante de resina - rectificado fino
20/14μ = 1100 = M20, diamante, aglomerante de resina - pulido
10/7μ = 1700 = M10, diamante, aglomerante de resina - pulido
5/3μ = 4000 = M4, diamante, aglomerante de resina - pulido
Recommendations on selection of sharpening stones
How to maintain sharpening stones
Download full catalog
Special resin bond BN-130, does not require cooling, but you may use water (or water based cooling liquids) as lubricant.
Metal bond on order
Grain size: Please select from the list, or read Technical information.The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding).
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA
Grain concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.
Concentration 200%- on order, 50% more expensive.
Available on stock
Application
For knife sharpening using such sharpeners as Hapstone or Edge Pro.
Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them.
"Stone preparation" is not available because of war.
Selection of SiC powders for dressing of sharpening stones
Stone Starting grit Finishing grit 500/400 μ = 35/40= D501 F16 (1230 μ) F24 (745 μ) 400/315 μ = 40/45= D426 F16 (1230 μ) F46 (370 μ) 315/250 μ = 50/60= D301 F24 (745 μ) F46 (370 μ) 250/200 μ = 60/70= D251 F24 (745 μ) F60 (260 μ) 200/160 μ = 70/80= D213 F36 (525 μ) F60 (260 μ) 160/125 μ = 100/120= D151 F46 (370 μ) F80 (180 μ) 125/100 μ = 120/140= D126 F60 (260 μ) F100 (129 μ) 100/80 μ = 140/170= D107 F60 (260 μ) F120 (109 μ) 80/63 μ = 170/200= D91 F80 (180 μ) F150 (82 μ) 63/50 μ = 230/270= D64 F100 (129 μ) F180 (69 μ) 50/40 μ = 270/325= D54 F120 (109 μ) F220 (58 μ) 40/28 μ = 550= M40 F150 (82 μ) F240 (46 μ) 28/20 μ = 650= M25 F180 (69 μ) F320 (30 μ) 20/14 μ = 1100= M20 F240 (46 μ) F400 (18 μ) 14/10 μ = 1500= M16 F320 (30 μ) F400 (18 μ) 10/7 μ = 1700= M10 F400 (18 μ) F600 (10 μ) 7/5 μ = 3000= M6.3 F600 (10 μ) F800 (6,7 μ) 5/3 μ = 4000= M4 F600 (10 μ) F800 (6,7 μ) 3/2 μ = 6000= M1.5 F800 (6,7 μ) F1200 (3 μ) 2/1 μ = 10000 F800 (6,7 μ) F1200 (3 μ) 1/0 μ F800 (6,7 μ) F1200 (3 μ) 0.5/0 μ F800 (6,7 μ) F1200 (3 μ)
Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.
Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
- 10 mins setting in 25% mixture (25 gr FeCl per 75 gr of water),
- 10 mins polish movements (carefully draw "8") on glass plate.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
Free shipping
Contact us for combined shipping quote or bulk discounts.
Please read more about:Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool
116-308 EUR
PIEDRAS DE AFILAR CBN, Aglutinante de resina, 100%, 200%, 150-25-5-2 (150-25-5-2)
PIEDRAS DE AFILAR CBN
150-25-5-2mm / 6''-1''-0.2''-0.08''
WDEJAMOS DE PRODUCIR ESTAS PIEDRAS Y OFRECEMOS PIEDRAS CBN INNOVADORAS CON ADHESIÓN COMBINADA: MEJOR RENDIMIENTO, MAYOR VIDA ÚTIL Y MENORES COSTOS.
Ofrecemos stock de estas piedras (100% y 200%) a la VENTA: 70 piezas de cada tamaño de grano (0,5/0 - 200/160).
Sin embargo, seguimos manteniendo algunas existencias de estas piedras CBN con aglomerante de resina.
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc.
CBN (cubic boron nitride) is the second-hardest material after diamond, and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.
Longitud: 150 mm = 6 pulgadas
Ancho: 25 mm = 1 pulgada
Altura de CBN: 2 mm = 0,08 pulgadas - en comparación con 3 mm de piedras nuevas
Altura total (con pieza en blanco): 5 mm = 0,2 pulgadas - en comparación con 7 mm de piedras nuevas
Recommendations on selection of sharpening stones
How to maintain sharpening stones
Download full catalog
Special resin bond BN-130, does not require cooling, but you may use water (or water based cooling liquids) as lubricant.
Metal bond on order
Grain size: Please select from the list, or read Technical information.
Grain concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.
Concentration 200%- on order, 50% more expensive.
Flat solid block on aluminum blank.
Available on stock
Application
For knife sharpening using such sharpeners as Hapstone or Edge Pro.
Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them.
"Stone preparation" is not available because of war.
Selection of SiC powders for dressing of sharpening stones
Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.
Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
Reference chart
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding
Free shipping
Contact us for combined shipping quote or bulk discounts.
150-25-5-2mm / 6''-1''-0.2''-0.08''
WDEJAMOS DE PRODUCIR ESTAS PIEDRAS Y OFRECEMOS PIEDRAS CBN INNOVADORAS CON ADHESIÓN COMBINADA: MEJOR RENDIMIENTO, MAYOR VIDA ÚTIL Y MENORES COSTOS.
Ofrecemos stock de estas piedras (100% y 200%) a la VENTA: 70 piezas de cada tamaño de grano (0,5/0 - 200/160).
Sin embargo, seguimos manteniendo algunas existencias de estas piedras CBN con aglomerante de resina.
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc.
CBN (cubic boron nitride) is the second-hardest material after diamond, and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.
Longitud: 150 mm = 6 pulgadas
Ancho: 25 mm = 1 pulgada
Altura de CBN: 2 mm = 0,08 pulgadas - en comparación con 3 mm de piedras nuevas
Altura total (con pieza en blanco): 5 mm = 0,2 pulgadas - en comparación con 7 mm de piedras nuevas
Recommendations on selection of sharpening stones
How to maintain sharpening stones
Download full catalog
Special resin bond BN-130, does not require cooling, but you may use water (or water based cooling liquids) as lubricant.
Metal bond on order
Grain size: Please select from the list, or read Technical information.
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding).
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA
Grain concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.
Concentration 200%- on order, 50% more expensive.
Flat solid block on aluminum blank.
Available on stock
Application
For knife sharpening using such sharpeners as Hapstone or Edge Pro.
Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them.
"Stone preparation" is not available because of war.
Selection of SiC powders for dressing of sharpening stones
| Stone | Starting grit | Finishing grit |
| 500/400 μ = 35/40= D501 | F16 (1230 μ) | F24 (745 μ) |
| 400/315 μ = 40/45= D426 | F16 (1230 μ) | F46 (370 μ) |
| 315/250 μ = 50/60= D301 | F24 (745 μ) | F46 (370 μ) |
| 250/200 μ = 60/70= D251 | F24 (745 μ) | F60 (260 μ) |
| 200/160 μ = 70/80= D213 | F36 (525 μ) | F60 (260 μ) |
| 160/125 μ = 100/120= D151 | F46 (370 μ) | F80 (180 μ) |
| 125/100 μ = 120/140= D126 | F60 (260 μ) | F100 (129 μ) |
| 100/80 μ = 140/170= D107 | F60 (260 μ) | F120 (109 μ) |
| 80/63 μ = 170/200= D91 | F80 (180 μ) | F150 (82 μ) |
| 63/50 μ = 230/270= D64 | F100 (129 μ) | F180 (69 μ) |
| 50/40 μ = 270/325= D54 | F120 (109 μ) | F220 (58 μ) |
| 40/28 μ = 550= M40 | F150 (82 μ) | F240 (46 μ) |
| 28/20 μ = 650= M25 | F180 (69 μ) | F320 (30 μ) |
| 20/14 μ = 1100= M20 | F240 (46 μ) | F400 (18 μ) |
| 14/10 μ = 1500= M16 | F320 (30 μ) | F400 (18 μ) |
| 10/7 μ = 1700= M10 | F400 (18 μ) | F600 (10 μ) |
| 7/5 μ = 3000= M6.3 | F600 (10 μ) | F800 (6,7 μ) |
| 5/3 μ = 4000= M4 | F600 (10 μ) | F800 (6,7 μ) |
| 3/2 μ = 6000= M1.5 | F800 (6,7 μ) | F1200 (3 μ) |
| 2/1 μ = 10000 | F800 (6,7 μ) | F1200 (3 μ) |
| 1/0 μ | F800 (6,7 μ) | F1200 (3 μ) |
| 0.5/0 μ | F800 (6,7 μ) | F1200 (3 μ) |
Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.
Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
Reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding
Free shipping
Contact us for combined shipping quote or bulk discounts.
Warranty, returns and refunds Grain size conversion, selection and use of your tool |
- 1