NEW (OLD STOCK) GENUINE KLOCKNER-MOELLER CONTACTORS

DIL 08-31-G-NA

Often referenced today under the modern Eaton identifier DILER-31-G specifies a mini contactor relay manufactured by Klöckner-Moeller (now a part of Eaton ).

Technical Specifications

1. Device Type: Auxiliary / control contactor relay.
2. Contact Configuration: 3NO + 1NC (3 Normally Open and 1 Normally Closed poles).
3. Coil Voltage: 24V DC (indicated by the letter G ).
4. Rated Operational Current: 4 A (at 400V, AC-15 category) or a continuous thermal current up to 10 A .
5. Market Variant (NA): North American variant built to satisfy UL and CSA standards.
6. Mounting Type: Standard 35mm DIN rail or screw mounting.
7. Termination: Screw terminals.

This device is primarily used in industrial automation, control panels, and motor control circuits to switch low-power auxiliary loads. In current Eaton product catalogs, the direct functional replacement for this legacy unit is the DILER-31-G(24VDC) (Article Number 010157 ).

DIL 2V-22-NA

Klöckner-Moeller  heavy-duty motor contactor 

Technical Specifications 

1. Device Type: Heavy-duty, industrial 3-phase power contactor.
2. Frame Size / Power Rating: 22 kW at 380/440V AC.
3. Continuous Thermal Current (\(I_{th}\)): Rated up to 60 A to 80 A depending on the specific environmental open/enclosed classification.
4. Auxiliary Contacts: 2NO + 2NC (2 Normally Open and 2 Normally Closed integrated auxiliary poles).
5. Market Variant (NA): Specifically designed and certified for the North American market, conforming directly to UL and CSA safety standards. [1, 2, 3, 4, 5, 6, 7]

Modern Eaton Equivalents

Because this specific legacy series has been discontinued for quite some time, you cannot purchase it directly from current factory lines. [1]

• Direct Replacement: In older transition catalogs, this unit was replaced by the DIL2M/22 series.
• Modern Replacement: In Eaton’s current generation, a standard DILM40 or DILM50 series contactor equipped with a DILM32-XHI22 auxiliary contact block serves as the functional equivalent. 

DIL 0-22-NA

Legacy 3-phase industrial power contactor manufactured by Klöckner-Moeller (now Eaton ). Unlike the smaller control relays (like the DIL 08 or DILER), the DIL 0 is a full-sized magnetic motor starter contactor designed to run heavy-duty electric motors.

Technical Specifications

• Device Type: 3-Phase Magnetic Motor Contactor.
• Power Rating: Rated at 7.5 HP at 230V and 10 HP at 460V (effectively a NEMA Size 0 equivalent equivalent).
• Continuous Thermal Current (\(I_{th}\)): 18 A continuous open current capacity.
• Integrated Auxiliary Contacts: 2NO + 2NC (2 Normally Open and 2 Normally Closed built-in safety contacts).
• Market Variant (NA): Designed specifically to satisfy the North American UL and CSA standards (certified for up to 600 VAC max operating voltage). [1, 2, 3, 4]

Replacement Information  

• The Transition Step: Klöckner-Moeller originally replaced this part with the DIL0M/22 or DIL0AM/22 sequence.
• The Modern Eaton Equivalent: Under current production standards, you can swap this unit with a modern DILM17-22 or a standard DILM17 power contactor outfitted with a front-mount DILM32-XHI22 auxiliary contact block. 

Klöckner-Moeller to Eaton Cross-Reference Table

Legacy Part Number (Klöckner-Moeller)	Modern Part Number (Eaton)	Eaton Article Number	Specifications / Notes
DIL 08-31-G-NA	DILER-31-G(24VDC)	010157	Control relay, 24V DC coil, 3NO + 1NC contacts.
DIL 2V-21-NA (or 2V-22-NA)	DILM40 + DILM32-XHI22	277766 (Contactor) + 277377 (Aux Block)	3-Pole Power Contactor, 22 kW capacity, includes 2NO + 2NC auxiliary frame setup.
DIL 0-22-NA	DILM17-22(...)	106364 (for 230V AC) / 106371 (for 24V DC)	3-Pole Power Contactor, 7.5 kW / 10 HP, built-in 2NO + 2NC contacts.

NZM9-250 / ZM9a-250-NA Klockner Moeller 250 A Disyuntor

Clasificaciones de interrupción:
MÁX. 240 V/30 000 A 
RMS 480 V/25 000 A 
SYM 600V / 18 000A 

Estos disyuntores se quitaron del interruptor principal, que nunca funcionó.Sin uso, como nuevo, con señales ocasionales de desmontaje.Todos los detalles técnicos están en las etiquetas.