GIFT BOX, 9+3 CBN SHARPENING STONES

GIFT BOX:  CBN, BORAZON, CUBIC BORON NITRIDE
SHARPENING STONES  
 
12 sharpening stones in wooden box: 9 cubic boron nitride stones plus 3 other. Stones are mounted on aluminum blanks. This set will serve you for decades. 
 
Wooden box for storage and transportation of  12 sharpening stones.    
Length: 185 mm, Width: 195 mm, Height: 40 mm, Number of cells: 12 
The maximum thickness of the stone: 7 mm. 

Content of the box  

1. CBN 150x25x7x3, Metal bond, 150%, grain size 315/250 - forming of cutting edge
2. CBN 150x25x7x3, Metal bond, 100%, grain size 200/160 - forming of cutting edge
3. CBN 150x25x7x3, Metal bond, 100%, grain size 125/100 - rough sharpening
4. CBN 150x25x7x3, Metal bond, 100%, grain size 80/63 - grinding
5. CBN 150x25x7x3, Metal bond, 100%, grain size 50/40 - fine grinding
6. CBN 150x25x7x3, Combined bond, 100%, grain size 28/20 - polishing
7. CBN 150x25x7x3, Combined bond, 100%, grain size 14/10 - polishing
8. CBN 150x25x7x3, Combined bond, 100%, grain size  7/5 - fine polishing
9. CBN 150x25x7x3, Combined bond, 100%, grain size  3/2 - fine polishing 
10. CBN 150x25x7x3, Combined bond, 100%, grain size  1/0 - fine polishing 
11. Leather on aluminum blank 160x25x7x4  for diamond polishing pastes with grain sizes 3/2-2/1
12. Leather glossy on aluminum blank 160x25x7x4  for diamond polishing pastes with grain sizes 1/0-0.25/0

Description of products in this set.

CBN (cubic boron nitride, borazon) stones are well known for high hardness and resistance to high temperatures and various chemical components of alloys and steels.
  
Comparing CBN and diamond grains, we must admit, that  CBN works softer and more productively, while at the same time it does not cause yellowing scratches on the cutting edge. This is due to the fact that CBN has a crystal structure in the shape of an eyepiece - the number of cutting edges is greater with less sharp corners - resulting in softness during processing and high productivity. Diamond has a crystal structure in the form of a tetrahedron, with fewer cutting edges and sharper corners of the crystal, which leads to more "aggressive" work of the diamond  
 
The following grains are available(please contact us to change set content): 0.5/0; 1/0; 2/1; 3/2; 5/3; 7/5; 10/7; 14/10; 20/14; 28/20; 40/28; 50/40; 63/50; 80/63; 100/80; 125/100; 160/125; 200/160; 250/200; 315/250. 

Quality Italian leather on  aluminum blank, used for applying polishing paste and further sharpening the cutting edge of the knife. It can also be used without paste. 
Glossy leather - for fine grits. 
Length: 160 mm, Width: 25 mm, Thickness: 7 mm 

Recommendations on selection of sharpening stones
How to maintain sharpening stones 

  

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

Stone	Starting grit	Finishing grit
500/400 μ = 35/40= D501	F16 (1230 μ)	F24 (745 μ)
400/315 μ = 40/45= D426	F16 (1230 μ)	F46 (370 μ)
315/250 μ = 50/60= D301	F24 (745 μ)	F46 (370 μ)
250/200 μ = 60/70= D251	F24 (745 μ)	F60 (260 μ)
200/160 μ = 70/80= D213	F36 (525 μ)	F60 (260 μ)
160/125 μ = 100/120= D151	F46 (370 μ)	F80 (180 μ)
125/100 μ = 120/140= D126	F60 (260 μ)	F100 (129 μ)
100/80 μ = 140/170= D107	F60 (260 μ)	F120 (109 μ)
80/63 μ = 170/200= D91	F80 (180 μ)	F150 (82 μ)
63/50 μ = 230/270= D64	F100 (129 μ)	F180 (69 μ)
50/40 μ = 270/325= D54	F120 (109 μ)	F220 (58 μ)
40/28 μ = 550= M40	F150 (82 μ)	F240 (46 μ)
28/20 μ = 650= M25	F180 (69 μ)	F320 (30 μ)
20/14 μ = 1100= M20	F240 (46 μ)	F400 (18 μ)
14/10 μ = 1500= M16	F320 (30 μ)	F400 (18 μ)
10/7 μ = 1700= M10	F400 (18 μ)	F600 (10 μ)
7/5 μ = 3000= M6.3	F600 (10 μ)	F800 (6,7 μ)
5/3 μ = 4000= M4	F600 (10 μ)	F800 (6,7 μ)
3/2 μ = 6000= M1.5	F800 (6,7 μ)	F1200 (3 μ)
2/1 μ = 10000	F800 (6,7 μ)	F1200 (3 μ)
1/0 μ	F800 (6,7 μ)	F1200 (3 μ)
0.5/0 μ	F800 (6,7 μ)	F1200 (3 μ)

Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

 

Please read more about: Shipping Warranty, returns and refunds Grain size conversion, selection and use of your tool

• Model: Gift12
• Manufacturer: