Cubic boron nitride sharpening stones

Cubic boron nitride (CBN) sharpening stones offer high productivity and quality in processing of steels.  Cubic boron nitride (CBN), borazon, cubonite, elbor is the 2nd hard material after diamond.
Sort By:  
 SHARPENING STONES METAL BOND
CBN SHARPENING STONES METAL BOND (CBNST)
CUBIC BORON NITRIDE HONING, SHARPENING STONES

CBN (cubic boron nitride)
 is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc. 
CBN (cubic boron nitride) is the second-hardest material after diamond,  and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.  
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.  
 
Length: 100, 125, 150, 200 mm  
Width: 8, 12, 25, 40 mm 
Height: 3, 4, 5 mm  

Recommendations on selection of sharpening stones.
How to maintain sharpening stones 

 
Download full catalog  

Metal bond, may require lubricant.

Grain size: Please select from the list, or read Technical information.  
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding). 
In grain selection window you see grain sizes according to standards:
MICRON=MESH(GRIT)=FEPA


CBN concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.

Flat solid block, abrasive grains are distributed evenly across the stone. 
You may also buy aluminum blank separately, if you buy stone.
How to attach stone to blank.


Available on stock 

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)

Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance is only needed every year or two.
In 1-2 years you may need to flatten stone, 20 mins with Ferric chloride (FeCl):
- 10 mins setting in 25% mixture (25 gr FeCl per 75 gr of water),
- 10 mins polish movements (carefully draw "8") on glass plate.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.

You may buy 100 gr. of FeCl in dimensions selection window (click also any grain size to select it). I sell it if you buy a stone.

Grain size/operation reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding


 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

Buy these stones on


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

91-400 EUR
0.00€
CBN SHARPENING STONES, COMBINED BOND (CBNST)
CUBIC BORON NITRIDE HONING, SHARPENING STONES
150 х 25 х 7 x 3 x 4

CBN (cubic boron nitride)
 is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc. 
CBN (cubic boron nitride) is the second-hardest material after diamond,  and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.  
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.  

Length: 150 mm = 6 inch
Width:   25 mm x = 1 inch
Total thickness:  7 mm = 0.28 inch
CBN thickness:    3 mm = 0.12 inch
Blank thickness: 4 mm = 0.16 inch

Recommendations on selection of sharpening stones
How to maintain sharpening stones  

 
Download full catalog  

Bond: innovative combined bonds to ensure the best performance.
Grain sizes: 0.5/0- 5/3 - resin bond BP50 for polishing
Grain sizes 5/3 - 63/50 - resin bond BP44 for grinding
Grain sizes 80/63 - 125/100 - wear resistant metal-resin bond BP08 for grinding
Grain sizes 160/125 - 315/250 - roughing metal-resin bond BP05 for grinding 

Grain size: Please select from the list, or read Technical information.  
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding). 
In grain selection window you see grain sizes according to standards:
MICRON=MESH(GRIT)=FEPA

CBN concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.

Flat solid block on aluminum.
  
Available on stock 

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)


Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 years), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.

You may buy 100 gr. of FeCl in dimensions selection window (click also any grain size to select it). I sell it if you buy a stone.

Grain size/operation reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding


 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

Buy these stones on


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

100 EUR
0.00€
RECOMMENDED SETS OF SHARPENING STONES (150-25-5-2)
RECOMMENDED SETS OF DIAMOND AND CBN STONES, METALL AND RESIN BONDS
 
Recommended selections of sharpening stones to make your choice easier:
- Highlight your operations: do you have "forming cutting edge" operation ?  What surface quality do you need, just "nice at eyesight" (polishing) or mirror (the finest polishing). So skip sets with unnecessary grains. 
- What is your workload ? If from time to time - skip metal bond stones, they are more expensive, but lasts longer. 
- The more knives you sharpen, the more you need stones, to keep steps in working operations (distances between grain sizes) shorter. 

Recommended set # 1:

  Diamond stone 150x25x5x2, resin bond, grain size 200/160 - forming the cutting edge
  Diamond stone 150x25x5x2, resin bond, grain size 100/80 - rough sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 40/28 - fine sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 20/14 - fine lapping
  Diamond stone 150x25x5x2, resin bond, grain size 7/5 - the finest lapping
  Diamond stone 150x25x5x2, resin bond, grain size 3/2 - polishing.

Recommended set # 2:

  Diamond stone 150x25x5x2, resin bond, grain size 200/160 - forming the cutting edge
  Diamond stone 150x25x5x2, resin bond, grain size 100/80 - rough sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 40/28 - fine sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 20/14 - fine lapping
  Diamond stone 150x25x5x2, resin bond, grain size 7/5 - the finest lapping
  Diamond stone 150x25x5x2, resin bond, grain size 3/2 - polishing.
  Diamond stone 150x25x5x2, resin bond, grain size 1/0 - fine polishing.
  Diamond stone 150x25x5x2, resin bond, grain size 0.25 / 0 - the finest polishing.

Recommended set # 3:

  Diamond stone 150x25x5x2, resin bond, grain size 200/160 - forming the cutting edge
  Diamond stone 150x25x5x2, resin bond, grain size 125/100 - rough sharpening
  Diamond stone 150x25x5x2,  resin bond, grain size 63/50 - semi-finishing
  Diamond stone 150x25x5x2, resin bond, grain size 28/20 - fine sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 14/10 - fine lapping
  Diamond stone 150x25x5x2, resin bond, grain size 7/5 - the finest lapping
  Diamond stone 150x25x5x2, resin bond, grain size 3/2 - polishing.

 Recommended set # 4:

  Diamond stone 150x25x5x2, resin bond, grain size 200/160 - forming the cutting edge
  Diamond stone 150x25x5x2, resin bond, grain size 125/100 - rough sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 63/50 - semi-finishing
  Diamond stone 150x25x5x2, resin bond, grain size 28/20 - fine sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 14/10 - fine lapping
  Diamond stone 150x25x5x2, resin bond, grain size 5/3 - polishing
  Diamond stone 150x25x5x2, resin bond, grain size 2/1 - fine polishing.
  Diamond stone 150x25x5x2, resin bond, grain size 0.5 / 0 - the finest polishing.

Recommended set # 5:

  Diamond stone 150x25x5x2, resin bond, grain size 100/80 - rough sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 40/28 - fine sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 20/14 - fine lapping
  Diamond stone 150x25x5x2, resin bond, grain size 7/5 - the finest lapping

 Recommended set # 6:

  Diamond stone 150x25x5x2, resin bond, grain size 125/100 - rough sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 63/50 - semi-finishing
  Diamond stone 150x25x5x2, resin bond, grain size 28/20 - fine sharpening
  Diamond stone 150x25x5x2, resin bond, grain size 14/10 - fine lapping
  Diamond stone 150x25x5x2, resin bond, grain size 7/5 - the finest lapping

 Recommended set # 7:

   Diamond stone 150x25x3, metal bond, 100%, grain size 160/125 - rough sharpening
   Diamond stone 150x25x3, metal bond, 100%, grain size 80/63 - semi-finishing
   Diamond stone 150x25x3, metal bond, 100% ,grain size 40/28 - fine sharpening
   Diamond stone 150x25x3, metal bond, 100%, grain size 20/14 - fine lapping
   Diamond stone 150x25x3, metal bond, 100%, grain size 10/7 - the finest lapping
   Diamond stone 150x25x3, metal bond, 100%, grain size 5/3 - polishing.

   Recommended set # 8:

  CBN stone 150x25x3, metal bond, grain size 200/160 - forming the cutting edge
  CBN stone 150x25x3, metal bond, grain size 100/80 - rough sharpening
  CBN stone 150x25x3, metal bond, grain size 40/28 - fine sharpening
  CBN stone 150x25x5x2 resin bond, grain size 20/14 - fine lapping
  CBN stone 150x25x5x2 resin bond, grain size 10/7 - the finest finishing
  CBN stone 150x25x5x2 resin bond, grain size 5/3   - polishing
  CBN stone 150x25x5x2 resin bond, grain size 2/1  - fine polishing.

Recommended set # 9:

CBN stone 150x25x3, metal bond, grain size 200/160 - forming the cutting edge
CBN stone 150x25x3, metal bond, grain size 100/80 - rough sharpening
CBN stone 150x25x3, metal bond, grain size 40/28 - fine sharpening
CBN stone 150x25x5x2 resin bond, grain size 20/14   - fine lapping
CBN stone 150x25x5x2 resin bond, grain size 10/7 - the finest finishing
CBN stone 150x25x5x2 resin bond, grain size 5/3   - polishing
CBN stone 150x25x5x2 resin bond, grain size 2/1   - fine polishing.
CBN stone 150x25x5x2, resin bond, grain size 0.5 / 0 - the finest polishing.

Recommended set # 10:

CBN stone 150x25x3, metal bond, grain size 200/160 - forming the cutting edge
CBN stone 150x25x3, metal bond, grain size 100/80 - rough sharpening
CBN stone 150x25x3, metal bond, grain size 40/28 - fine sharpening
CBN stone 150x25x5x2 resin bond, grain size  20/14   - fine lapping
CBN stone 150x25x5x2 resin bond, grain size 7/5   - the finest finishing
CBN stone 150x25x5x2 resin bond, grain size 3/2   - polishing

Recommended set # 11:

CBN stone 150x25x3, metal bond, grain size 200/160 - forming the cutting edge
CBN stone 150x25x3, metal bond, grain size 100/80 - rough sharpening
CBN stone 150x25x3, metal bond, grain size 40/28 - fine sharpening
CBN stone 150x25x5x2 resin bond, grain size 20/14   - fine lapping
CBN stone 150x25x5x2 resin bond 7/5 grain size - the finest finishing
CBN stone 150x25x5x2 resin bond 3/2 grain size - polishing
CBN stone 150x25x5x2 resin bond, grain size 1/0  - fine polishing.

Recommended set # 12:

CBN stone 150x25x3, metal bond, grain size 200/160 - forming the cutting edge
CBN stone 150x25x3, metal bond, grain size 125/100 - rough sharpening
CBN stone 150х25х3, metal bond, , grain size 63/50 - semi-finish sharpening
CBN stone 150x25x3, metal bond, grain size 28/20 - fine finishing
CBN stone 150x25x5x2 resin bond, grain size 14/10 - fine lapping
CBN stone 150x25x5x2, resin bond, grain size 7/5 - the finest finishing
CBN stone 150x25x5x2, resin bond, grain size 3/2 - polishing.

Recommended set # 13:

CBN stone 150x25x3, metal bond, grain size 125/100 - rough sharpening
CBN stone 150х25х3, metal bond, grain size 63/50 - semi-finish sharpening
CBN stone 150x25x3, metal bond, grain size 28/20 - fine finishing
CBN stone 150x25x5x2, resin bond, grain size 14/10 - fine lapping
CBN stone 150x25x5x2, resin bond 7/5 grain size - the finest finishing

Recommended set # 14:

CBN stone 150x25x3, metal bond, grain size 100/80 - rough sharpening
CBN stone 150x25x3, metal bond, grain size 40/28 - fine sharpening
CBN stone 150x25x5x2, resin bond, grain size 20/14 - fine lapping
CBN stone 150x25x5x2, resin bond, grain size 10/7 - the finest finishing

 
 
Recommendations on selection of sharpening stones
How to maintain sharpening stones 


Download full catalog  

Special resin bond BN-130,  does not require cooling, but you may use water (or water based cooling liquids) as lubricant.
Metal bond on order 

Grain size: Please select from the list, or read Technical information.  
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding). 
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA

Grain concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.
Concentration 200%- on order, 50% more expensive. 
 
Available on stock 

Application
For knife sharpening using such sharpeners as Hapstone or Edge Pro.

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)


Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
   - 10 mins setting in 25% mixture (25 gr FeCl per 75 gr of water),
   - 10 mins polish movements (carefully draw "8") on glass plate.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

Buy these stones on


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

330-510 EUR
0.00€
GIFT BOXES, 8+1 DIAMOND OR CBN SHARPENING STONES (Gift)

GIFT BOXES, DIAMOND AND CBN SHARPENING STONES  
 
9 sharpening stones in wooden box.
Set CBN - cubic boron nitride sharpening stones. 
Set Diamond - diamond sharpening stones. 

Wooden box for storage and transportation of  9 sharpening stones.    
Length: 185 mm 
Width: 160 mm
Height: 40 mm  
Number of cells: 9 
The maximum thickness of the stone: 7 mm. 

Stones: abrasive, mounted on aluminum blank, dimensions: length, width, total thickness, working area thickness. Bonds: metal M2-01 for grinding, resin BP44 for soft grinding,  resin BP50 for polishing.
 
1. Set CBN. Cubic boron nitride sharpening stones

CBN 150x25x7x3, Metal bond, 150%, grit 315/250 - forming of cutting edge
CBN 150x25x7x3, Metal bond, 100%, grit 200/160 - forming of cutting edge
CBN 150x25x7x3, Metal bond, 100%, grit 125/100 - rough sharpening
CBN 150x25x7x3, Metal bond, 100%, grit 63/50 - grinding
CBN 150x25x7x3, Resin bond, 100%, grit 28/20 - fine grinding
CBN 150x25x7x3, Resin bond, 100%, grit 14/10 - polishing
CBN 150x25x7x3, Resin bond, 100%, grit 7/5 - fine polishing
CBN 150x25x7x3, Resin bond, 100%, grit 3/2 - fine polishing
Italian Black Slate 152x25x7x4 mm, natural stone for superfinishing operations

2. Set Diamond. Diamond sharpening stones 

Diamond 150x25x7x3, Metal bond, 100%, grit 200/160 - forming cutting edge
Diamond 150x25x7x3, Metal bond, 100%, grit 125/100 - rough grinding
Diamond 150x25x7x3, Metal bond, 100%, grit 80/63 - grinding
Diamond 150x25x7x3, Metal bond, 100%, grit 50/40 - grinding
Diamond 150x25x7x3, Resin bond, 100%, grit 28/20 - fine grinding
Diamond 150x25x7x3, Resin bond, 100%, grit 14/10 - polishing
Diamond 150x25x7x3, Resin bond, 100%, grit 7/5 - fine polishing
Diamond 150x25x7x3, Resin bond, 100%, grit 3/2 - fine polishing
Italian Black Slate 152x25x7x4 - natural stone for superfinishing operations

Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  


Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)


Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

800, 870 EUR
0.00€
PREMIUM CBN SHARPENING STONES 150-25-5-2 / 150-25-7-3 (150-25-5-2/3)
CBN SHARPENING STONES, CUBIC BORON NITRIDE SHARPENING STONES, CONCENTRATION 200% 
150-25-5-2  AND  150-25-7-3 

 
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc. 

CBN (cubic boron nitride) is the second-hardest material after diamond,  and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.  
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.  


Length: 150 mm = 6 inch
Width:   25 mm = 1 inch
CBN height: 2 mm = 0.08 inch / 3 mm = 0.12 inch 
Total height (with blank): 5 mm = 0.2 inch / 7 mm = 0.28 inch
 
Recommendations on selection of sharpening stones
How to maintain sharpening stones 


Download full catalog  

Bonds:
150-25-5-2 -
Edge-resistant resin bond BN-130 does not require coolant.
150-25-7-3 - Copper-resin bond BP50, it is as wear-resistant as copper-tin (metal) bond, but softer, does not require coolant. 

Grain size: Please select from the list, or read Technical information.  
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding). 
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA

Grain concentration: 200%
Do not waste your money on cheaper stones with lower/unknown concentration.
 
Flat solid block on aluminum blank.
 
Available on stock 

Application
For knife sharpening using such sharpeners as Hapstone, Edge Pro, Kazak Pro.

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)


Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

Buy these stones on


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

97 EUR
0.00€
NARROW DIAMOND AND CBN SHARPENING STONES 150-12-7-4-3 FOR CURVED BLADES (150-12-7-4-3)
DIAMOND AND CBN (CUBIC BORON NITRIDE) SHARPENING STONES, METAL BOND, CONCENTRATION 100%, NARROW 
150-12-7-4-3   

 
Length: 150 mm = 6 inch
Width:   12 mm = 0.5 inch
CBN height: 3 mm = 0.12 inch  
Total height (with blank): 7 mm = 0.28 inch  
 
Recommendations on selection of sharpening stones
How to maintain sharpening stones 


Download full catalog  

Metal Bond
Flat solid block on aluminum blank.
 
Grain size: Please select from the list, or read Technical information.  
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding). 
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA

Grain concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.
 
Available on stock 

Application
For  sharpening of curved blades using such sharpeners as Hapstone, Edge Pro, Kazak Pro. 

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)


Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.

Grain size/operation reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding
 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

67 EUR
0.00€
  sharpening stones 150x25x5x2 / 6
CBN SHARPENING STONES, RESIN BOND, 150-25-5-2mm / 6''-1''-0.2''-0.08'' (150-25-5-2)
CBN SHARPENING STONES
 
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc. 
CBN (cubic boron nitride) is the second-hardest material after diamond,  and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.  
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.  


Length: 150 mm = 6 inch
Width: 25 mm = 1 inch
CBN height: 2 mm = 0.08 inch
Total height (with blank): 5 mm = 0.2 inch
 
Recommendations on selection of sharpening stones
 How to maintain sharpening stones 


Download full catalog  

Special resin bond BN-130,  does not require cooling, but you may use water (or water based cooling liquids) as lubricant.
Metal bond on order 

Grain size: Please select from the list, or read Technical information.  
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding). 
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA

Grain concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.
Concentration 200%- on order, 50% more expensive. 

Flat solid block on aluminum blank.
You may also buy aluminum blank separately, if you buy stone.

Available on stock 

Application
For knife sharpening using such sharpeners as Hapstone or Edge Pro.

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)


Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.

Reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding
 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

Buy these stones on


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

65-72 EUR
0.00€
Per Page      1 - 7 of 7
  • 1