CBN SHARPENING STONES, COMBINED BOND

100 EUR
*
*
Qty:
CUBIC BORON NITRIDE HONING, SHARPENING STONES
150 х 25 х 7 x 3 x 4

CBN (cubic boron nitride)
 is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc. 
CBN (cubic boron nitride) is the second-hardest material after diamond,  and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.  
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.  

Length: 150 mm = 6 inch
Width:   25 mm x = 1 inch
Total thickness:  7 mm = 0.28 inch
CBN thickness:    3 mm = 0.12 inch
Blank thickness: 4 mm = 0.16 inch

Recommendations on selection of sharpening stones
How to maintain sharpening stones  

 
Download full catalog  

Bond: innovative combined bonds to ensure the best performance.
Grain sizes: 0.5/0- 5/3 - resin bond BP50 for polishing
Grain sizes 5/3 - 63/50 - resin bond BP44 for grinding
Grain sizes 80/63 - 125/100 - wear resistant metal-resin bond BP08 for grinding
Grain sizes 160/125 - 315/250 - roughing metal-resin bond BP05 for grinding 

Grain size: Please select from the list, or read Technical information.  
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding). 
In grain selection window you see grain sizes according to standards:
MICRON=MESH(GRIT)=FEPA

CBN concentration: 100%
Do not waste your money on cheaper stones with lower/unknown concentration.

Flat solid block on aluminum.
  
Available on stock 

Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them. 
"Stone preparation" is not available because of war.  

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)


Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.

Maintenance (in 1-2 years), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.

You may buy 100 gr. of FeCl in dimensions selection window (click also any grain size to select it). I sell it if you buy a stone.

Grain size/operation reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding


 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

Buy these stones on


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

  • Model: CBNST
  • Manufacturer: Plant of Diamond Tools, Ukraine