EN 
DE 
FR 
ES Pesquisa
Critérios de pesquisa
Produtos que correspondem à pesquisa
PACOTES INICIAIS DE ECONOMIA (150-25-6-3)
KITS INICIAIS DE PEDRAS DE AFIAR DIAMANTES E CBN, LIGAÇÕES DE RESINA E METAL
Solução de baixo custo, mas de alta qualidade para afiadores iniciantes. A lâmina é mais fina, as bordas não são biseladas, a embalagem é simples e as pedras precisam ser preparadas.
As pedras são gravadas com a palavra "Premium" para demonstrar que os termos "premium", "elite" ou "profissional" podem ser aplicados até mesmo a produtos tão modestos como estes.
Comprimento: 150 mm = 6 polegadas
Largura: 25 mm = 1 polegada
Altura do CBN: 3 mm = 0,1 polegada
Altura total (com a peça bruta): 6 mm = 0,2 polegada
Kit inicial nº 1, 3 pedras de CBN, liga de resina
50/40 μm = 270/325 = D54 - desbaste fino
20/14 μm = 1100 = M20 - polimento
7/5 μm = 3000 = M6.3 - polimento
Kit inicial nº 2, 4 pedras de CBN, liga metálica e de resina
100/80 μm = 140/170 = D107, liga metálica - desbaste fino
50/40 μm = 270/325 = D54, liga de resina - desbaste fino
20/14 μm = 1100 = M20, liga de resina - Polimento
7/5μ = 3000 = M6.3, liga de resina - polimento
Kit inicial nº 3, 5 pedras CBN, liga de metal e resina
100/80μ = 140/170 = D107, liga de metal - desbaste fino
50/40μ = 270/325 = D54 - desbaste fino
20/14μ = 1100 = M20, liga de resina - polimento
10/7μ = 1700 = M10, liga de resina - polimento
5/3μ = 4000 = M4, liga de resina - polimento
Kit inicial nº 4, 6 pedras CBN, liga de metal e resina
200/160μ = 70/80 = D213, liga de metal - afiação/desbaste grosso
100/80μ = 140/170 = D107, liga de metal - Desbaste fino
50/40μ = 270/325 = D54, liga de resina - desbaste fino
20/14μ = 1100 = M20, liga de resina - polimento
10/7μ = 1700 = M10, liga de resina - polimento
5/3μ = 4000 = M4, liga de resina - polimento
Kit inicial nº 5, 3 pedras diamantadas, liga de resina
50/40μ = 270/325 = D54 - desbaste fino
20/14μ = 1100 = M20 - polimento
7/5μ = 3000 = M6.3 - polimento
Kit inicial nº 6, 4 pedras diamantadas, liga de resina
100/80μ = 140/170 = D107 - desbaste fino
50/40μ = Kit inicial nº 7, 4 pedras de diamante e CBN, liga metálica e resina
100/80μ = 140/170 = D107, CBN, liga metálica - desbaste fino
50/40μ = 270/325 = D54, diamante, liga resina - desbaste fino
20/14μ = 1100 = M20, diamante, liga resina - polimento
7/5μ = 3000 = M6.3, diamante, liga resina - polimento
Kit inicial nº 8, 5 pedras de CBN e diamante, liga metálica e resina
100/80μ = 140/170 = D107, CBN, Ligação metálica - desbaste fino
50/40μ = 270/325 = D54, ligação resinada - desbaste fino
20/14μ = 1100 = M20, diamante, ligação resinada - polimento
10/7μ = 1700 = M10, diamante, ligação resinada - polimento
5/3μ = 4000 = M4, diamante, ligação resinada - polimento
Kit inicial nº 9, 6 pedras CBN, ligação metálica e resinada
200/160μ = 70/80 = D213, CBN, ligação metálica - afiação/desbaste grosso
100/80μ = 140/170 = D107, CBN, ligação metálica - desbaste fino
50/40μ = 270/325 = D54, diamante, ligação resinada - desbaste fino
20/14μ = 1100 = M20, Diamante, liga de resina - polimento
10/7μ = 1700 = M10, diamante, liga de resina - polimento
5/3μ = 4000 = M4, diamante, liga de resina - polimento
Ligações:
Ligação de resina: fenol-formaldeído, não requer lubrificante, mas você pode usar água (ou líquidos refrigerantes à base de água)
Ligação metálica: M2-01, cobre-estanho
Granulometria: Selecione na lista ou leia as informações técnicas.
A granulometria mais fina é 0,5/0 mícron (polimento fino), a mais grossa é 200/160 mícron (desbaste).
Na janela de seleção de grãos, você verá os tamanhos de grãos de acordo com os padrões:
MICRON = MESH (GRÃO) = FEPA
Disponível em estoque
Preparação de pedras de afiar
Essas pedras requerem preparação (afiamento), caso contrário, elas se autopolirão após a afiação de 30 a 50 facas. Elas ficarão com uma cor dourada e funcionarão bem.
Este é um problema comum a todos os fabricantes: os grãos abrasivos são cobertos por uma camada de ligante, então é necessário "liberá-los".
Seleção de pós de SiC para afiar pedras de afiar
Stone Starting grit Finishing grit 500/400 μ = 35/40= D501 F16 (1230 μ) F24 (745 μ) 400/315 μ = 40/45= D426 F16 (1230 μ) F46 (370 μ) 315/250 μ = 50/60= D301 F24 (745 μ) F46 (370 μ) 250/200 μ = 60/70= D251 F24 (745 μ) F60 (260 μ) 200/160 μ = 70/80= D213 F36 (525 μ) F60 (260 μ) 160/125 μ = 100/120= D151 F46 (370 μ) F80 (180 μ) 125/100 μ = 120/140= D126 F60 (260 μ) F100 (129 μ) 100/80 μ = 140/170= D107 F60 (260 μ) F120 (109 μ) 80/63 μ = 170/200= D91 F80 (180 μ) F150 (82 μ) 63/50 μ = 230/270= D64 F100 (129 μ) F180 (69 μ) 50/40 μ = 270/325= D54 F120 (109 μ) F220 (58 μ) 40/28 μ = 550= M40 F150 (82 μ) F240 (46 μ) 28/20 μ = 650= M25 F180 (69 μ) F320 (30 μ) 20/14 μ = 1100= M20 F240 (46 μ) F400 (18 μ) 14/10 μ = 1500= M16 F320 (30 μ) F400 (18 μ) 10/7 μ = 1700= M10 F400 (18 μ) F600 (10 μ) 7/5 μ = 3000= M6.3 F600 (10 μ) F800 (6,7 μ) 5/3 μ = 4000= M4 F600 (10 μ) F800 (6,7 μ) 3/2 μ = 6000= M1.5 F800 (6,7 μ) F1200 (3 μ) 2/1 μ = 10000 F800 (6,7 μ) F1200 (3 μ) 1/0 μ F800 (6,7 μ) F1200 (3 μ) 0.5/0 μ F800 (6,7 μ) F1200 (3 μ)
Uso e limpeza de pedras de afiar
Use qualquer óleo suave (óleo de bebê, azeite de oliva...) para evitar o vitrificação. Se vitrificado, limpe com álcool e uma escova de dentes.
Manutenção (a cada 1-2 anos), aplainamento/revitalização:
- Pedras com liga de resina - com pó de carbeto de silício (sílica) em placa de vidro,
- Pedras com liga metálica - com FeCl₃.
- 10 minutos de imersão em uma mistura a 25% (25 g de FeCl₃ para 75 g de água),
- 10 minutos de polimento com movimentos (desenhe cuidadosamente um "8") em uma placa de vidro.
Você pode comprar 100 g de FeCl₃ na janela de seleção de grãos. Eu vendo junto com a compra de uma pedra.
Free shipping
Contact us for combined shipping quote or bulk discounts.
Please read more about:Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool
116-308 EUR
PEDRAS DE AFIAÇÃO CBN, LIGAÇÃO DE RESINA, 100%, 200%, 150-25-5-2 (150-25-5-2)
CBN RESIN BOND SHARPENING STONES
150-25-5-2mm / 6''-1''-0.2''-0.08''
WE STOPPED PRODUCTION OF THESE STONES AND OFFER INNOVATIVE CBN STONES WITH COMBINED BOND: BETTER PERFORMANCE, LONGER TOOL LIFE AND LOWER COSTS.
We offer stock of these stones (100% and 200%) for SALE: 70pcs of each grain size (0.5/0 - 200/160).
Yet, we still continue maintaining some stock of these resin bond CBN stones.
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc.
CBN (cubic boron nitride) is the second-hardest material after diamond, and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.
Length: 150 mm = 6 inch
Width: 25 mm = 1 inch
CBN height: 2 mm = 0.08 inch - comparing with 3 mm of new stones
Total height (with blank): 5 mm = 0.2 inch - comparing with 7 mm of new stones
Recommendations on selection of sharpening stones
How to maintain sharpening stones
Download full catalog
Special resin bond BN-130, does not require cooling, but you may use water (or water based cooling liquids) as lubricant.
Metal bond on order
Grain size: Please select from the list, or read Technical information.
Grain concentration: 100% and 200%
Flat solid block on aluminum blank.
Available on stock
Application
For knife sharpening using such sharpeners as Hapstone or Edge Pro.
Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them.
"Stone preparation" is not available because of war.
Selection of SiC powders for dressing of sharpening stones
Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.
Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
Reference chart
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding
Free shipping
Contact us for combined shipping quote or bulk discounts.
150-25-5-2mm / 6''-1''-0.2''-0.08''
WE STOPPED PRODUCTION OF THESE STONES AND OFFER INNOVATIVE CBN STONES WITH COMBINED BOND: BETTER PERFORMANCE, LONGER TOOL LIFE AND LOWER COSTS.
We offer stock of these stones (100% and 200%) for SALE: 70pcs of each grain size (0.5/0 - 200/160).
Yet, we still continue maintaining some stock of these resin bond CBN stones.
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc.
CBN (cubic boron nitride) is the second-hardest material after diamond, and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.
Length: 150 mm = 6 inch
Width: 25 mm = 1 inch
CBN height: 2 mm = 0.08 inch - comparing with 3 mm of new stones
Total height (with blank): 5 mm = 0.2 inch - comparing with 7 mm of new stones
Recommendations on selection of sharpening stones
How to maintain sharpening stones
Download full catalog
Special resin bond BN-130, does not require cooling, but you may use water (or water based cooling liquids) as lubricant.
Metal bond on order
Grain size: Please select from the list, or read Technical information.
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding).
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA
Grain concentration: 100% and 200%
Flat solid block on aluminum blank.
Available on stock
Application
For knife sharpening using such sharpeners as Hapstone or Edge Pro.
Preparation of sharpening stones
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them.
"Stone preparation" is not available because of war.
Selection of SiC powders for dressing of sharpening stones
| Stone | Starting grit | Finishing grit |
| 500/400 μ = 35/40= D501 | F16 (1230 μ) | F24 (745 μ) |
| 400/315 μ = 40/45= D426 | F16 (1230 μ) | F46 (370 μ) |
| 315/250 μ = 50/60= D301 | F24 (745 μ) | F46 (370 μ) |
| 250/200 μ = 60/70= D251 | F24 (745 μ) | F60 (260 μ) |
| 200/160 μ = 70/80= D213 | F36 (525 μ) | F60 (260 μ) |
| 160/125 μ = 100/120= D151 | F46 (370 μ) | F80 (180 μ) |
| 125/100 μ = 120/140= D126 | F60 (260 μ) | F100 (129 μ) |
| 100/80 μ = 140/170= D107 | F60 (260 μ) | F120 (109 μ) |
| 80/63 μ = 170/200= D91 | F80 (180 μ) | F150 (82 μ) |
| 63/50 μ = 230/270= D64 | F100 (129 μ) | F180 (69 μ) |
| 50/40 μ = 270/325= D54 | F120 (109 μ) | F220 (58 μ) |
| 40/28 μ = 550= M40 | F150 (82 μ) | F240 (46 μ) |
| 28/20 μ = 650= M25 | F180 (69 μ) | F320 (30 μ) |
| 20/14 μ = 1100= M20 | F240 (46 μ) | F400 (18 μ) |
| 14/10 μ = 1500= M16 | F320 (30 μ) | F400 (18 μ) |
| 10/7 μ = 1700= M10 | F400 (18 μ) | F600 (10 μ) |
| 7/5 μ = 3000= M6.3 | F600 (10 μ) | F800 (6,7 μ) |
| 5/3 μ = 4000= M4 | F600 (10 μ) | F800 (6,7 μ) |
| 3/2 μ = 6000= M1.5 | F800 (6,7 μ) | F1200 (3 μ) |
| 2/1 μ = 10000 | F800 (6,7 μ) | F1200 (3 μ) |
| 1/0 μ | F800 (6,7 μ) | F1200 (3 μ) |
| 0.5/0 μ | F800 (6,7 μ) | F1200 (3 μ) |
Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.
Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
Reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding
Free shipping
Contact us for combined shipping quote or bulk discounts.
Warranty, returns and refunds Grain size conversion, selection and use of your tool |
- 1