Sharpening accessories

Storage boxes. oil, coolant, blanks etc.
There's individual shipping costs for each product, contact us for combined shipping rates.
Sort By:  
Italian black slate
POLISHERS (PLSHR)

POLISHING BLANKS

Italian Black Slate 152-25-7-4

Identical to  dark Thuringian shale in working properties, with the difference that this slate is a little harder, which is undoubtedly an advantage when working in Apexoid type sharpeners. The late produces a very moderate fine white suspension. Works  with any type of steel, removing residual scratches on the cutting edge. Superfinishing stone, which is recommended to use after   abrasives   F1000-F2000, or superabrasive 5/3, 3/2, 2/1, 1/0 micron. Each stone is supplied with a slur (a small suspension guiding stone). The recommended cooling liquid are water, oil.

Glossy leather 160-12-7, 160-25-7

Leather attached to aluminum blank for knife sharpening with pastes of fine grain sizes. The leather is polished  to make glossy surface to use, applying polishing paste and polishing the cutting edge of a knife.
You can use it without paste too. 

Rough leather 160-12-7, 160-25-7

Leather attached to aluminum blank for knife sharpening with pastes of coarse grain sizes. The leather is polished  to make rough surface to use, applying polishing paste and polishing the cutting edge of a knife.
You can use it without paste too. 


Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

0.00€
CHAMFERING STONE (BLNK)

DIAMOND CHAMFERING STONE ON A STEEL BASE
150-12-10-3-4

 
Application: removal of chamfers from sharpening stones.

Dimensions, mm: 
Length - 150 mm
Width - 12 mm
Total thickness - 10 mm
Working layer thickness - 3 mm
Steel base thickness - 2 mm
Aluminum blank thickness - 4 mm

Grain sizes: 
200/160μ = 70/80 = D213
160/125μ = 100/120 = D151

Metal bond M2-01

Concentration 100%


Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

0.00€
Silicon carbide powders, set of 6 pcs. (SicPowd)

SILICON CARBIDE POWDERS, 6 cans 100 gr. each
 
Grit  F60 (260 μm)  
Grit  F100 (129 μm)  
Grit  F150 (82 μm)  
Grit  F240 (46 μm)  
Grit  F400 (18 μm)  
Grit  F800 (6.7μm)


Box for these powders

Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

37 EUR
37.00€
Rectangular tube for stones (WbTb)

STORAGE WOODEN TUBES, RECTANGULAR  
 
Please select box for stones with required dimensions from the list
Dimensions: Length-Width-Thickness, mm

STONE QUANTITY AND  DIMENSIONS, MM  BOX DIMENSIONS
9, 150-25-7180х112х58
12, 150-25-7180х114х73
15, 150-25-7180х114х86



 

  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

40-54 EUR
0.00€
Round tube, lined with leather inside, for 9 stones (AccSBt)

STORAGE BOX:  ROUND TUBE, LINED WITH LEATHER INSIDE FOR 9 SHARPENING STONES  
 
Wooden box  for 9 sharpening stones 160x25x7 mm
Dimensions: 180x122 (diameter) mm
 

Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

49 EUR
49.00€
Wooden boxes, lined with leather inside (WbLe)

STORAGE WOODEN BOXES , LINED WITH LEATHER INSIDE  
 
Please select box for stones with required dimensions from the list
Dimensions: Length-Width-Thickness, mm

STONE QUANTITY AND  DIMENSIONS, MM  BOX DIMENSIONS
6, 150-25-7193х108х45
9, 150-25-7193х140х45
12, 150-25-7195х183х45
15, 150-25-7195х220х45
17, 150-25-7195х245х45
9, 150-35-7195х145х54
12, 150-35-7195х190х54
8, 150-50-7198х140х70
9, 200-30-8250х150х48
12, 200-30-8250х185х48



 

  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

37-61 EUR
0.00€
WOODEN BOXES, BOOK STYLE (WbBS)

STORAGE WOODEN BOXES , BOOK STYLE  
 
Please select box for stones with required dimensions from the list
Dimensions: Length-Width-Thickness, mm

STONE QUANTITY AND  DIMENSIONS, MM  BOX DIMENSIONS
9, 150-25-7185х160х40
12, 150-25-7185х195х40
12, 150-12-7185х195х40
9, 200-30-8235х175х47



 

  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

41-48 EUR
0.00€
CLEANER FOR STONES (SOZH)

CLEANING LIQUID FOR  SHARPENING STONES 
 
100 ml = 3.4 oz 

One drop  of this cleaner has excellent ability to wash stone after  sharpening, removing   sludge from the surface.

Degreases, quickly evaporates after application. Does not leave a "greasy" film.

Fire hazard!


Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

6 EUR
6.00€
LUBRICOOLANT FOR STONES (SOZH)

LUBRICOOLANT, CUTTING FLUID, LUBROCATING FLUID, METAL CUTTING OIL  FOR  SHARPENING STONES, WATER SOLUBLE  
 
100 ml = 3.4 oz 

Clean knife after sharpening with one drop of this fluid if you sharp dry, or use as lubricant if you work wet. 


Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

6 EUR
6.00€
SET OF 5 ABRASIVE STONES - ELECTRO CORUNDUM (ECST)
 SET OF 5 SHARPENING STONES, ELECTROCORUNDUM
150х25х10(9) 

High quality sintered electrocorundum (aluminum oxide), ceramic bond, on aluminum blank.  It is far superior  to most analogous products. 
 
Length: 150 mm  
Width:  25 mm 
Height: 10 or 9 mm  

Set includes: 

 1. 150x25x10 - 150 grit   - 125/100 μ - grinding
 2. 150x25x10 - 320 grit   - 50/40 μ - fine grinding
 3. 150x25x10 - 650 grit   28/20 μ - polishing
 4. 150x20x9 -  1100 grit 20/14 μ - polishing
 5. 150x20x9 -  1500 grit  14/10 μ - polishing

How to use electrocorundum stones  
Soak stone in water for 5 minutes.
Moisten the stone with water from time to time to keep suspensions formed on the stone of the required density:
- keep max. concentration of suspension with abrasive grains at the initial stages of sharpening
- remove the suspension from the surface of the stone by the end of polishing.
 
Available on stock 
 
Flatten the stones when necessary with SiC powders, see grain selection table below.

Selection of SiC powders for  dressing  of sharpening stones

StoneStarting gritFinishing grit
500/400 μ = 35/40= D501 F16 (1230 μ)F24 (745 μ)
400/315 μ = 40/45= D426F16 (1230 μ)F46 (370 μ)
315/250 μ = 50/60= D301 F24 (745 μ)F46 (370 μ)
250/200 μ = 60/70= D251F24 (745 μ)F60 (260 μ)
200/160 μ = 70/80= D213F36 (525 μ)F60 (260 μ)
160/125 μ = 100/120= D151 F46 (370 μ)F80 (180 μ)
125/100 μ = 120/140= D126  F60 (260 μ)F100 (129 μ)
100/80 μ = 140/170= D107F60 (260 μ)F120 (109 μ)
 80/63 μ = 170/200= D91  F80 (180 μ)F150 (82 μ)
63/50 μ = 230/270= D64 F100 (129 μ)F180 (69 μ)
50/40 μ = 270/325= D54  F120 (109 μ)F220 (58 μ)
40/28 μ = 550= M40F150 (82 μ)F240 (46 μ)
28/20 μ = 650= M25  F180 (69 μ)F320 (30 μ)
20/14 μ = 1100= M20F240 (46 μ)F400 (18 μ)
14/10 μ = 1500= M16  F320 (30 μ)F400 (18 μ)
10/7 μ = 1700= M10F400 (18 μ)F600 (10 μ)
7/5 μ = 3000= M6.3  F600 (10 μ)F800 (6,7 μ)
5/3 μ = 4000= M4F600 (10 μ)F800 (6,7 μ)
3/2 μ = 6000= M1.5 F800 (6,7 μ)F1200 (3 μ)
2/1 μ = 10000F800 (6,7 μ)F1200 (3 μ)
1/0 μ   F800 (6,7 μ)F1200 (3 μ)
0.5/0 μ   F800 (6,7 μ)F1200 (3 μ)

  
Grain size/operation reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding


 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 



Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

99 EUR
99.00€
ALUNIMUM BLANKS (BLNK)

 ALUNIMUM BLANKS FOR SHARPENING STONES
 
Dimensions: Length - Width - Thickness, mm 

Blanks 160 mm are with  sharp chamfers 45° 
Length to bevels  for 160 mm blank with sharp chamfers  is 154mm

Blanks 200 mm are with square chamfers 90°

Blanks 160-24-4 ENGR may be laser engraved on 3 sides with standard marking or  contact us for custom marking. 

200-70-10 
200-40-8
160-50-5
160-50-4
160-35-4
160-25-5
160-25-4
160-25-3
160-25-2
160-20-3
160-12-4
160-12-3

Recommendations on selection of sharpening stones
How to maintain sharpening stones 


  



Contact us for combined shipping  quote or bulk discounts. 

 


Please read more about:

Shipping
Warranty, returns and refunds
Grain size conversion, selection and use of your tool

0.00€
ABRASIVE BOOSTER (ABRBOOST)

ABRASIVE BOOSTER FOR CLEANING AND LEVELING SHARPENING STONES

Dimensions: 200x60x20 mm = 8''x2.3''x0.8''

EXTRA COARSE: for sharpening stones with grain size  125/100μ = 120/140 = D126 and higher

COARSE: for sharpening stones 100/80μ - 50/40μ

MEDIUM: for sharpening stones with grains sizes below 40/28μ = 550 = M40

How to use:  Moisten it before use. Gently (do not apply excessive pressure) make  movements of sharpening stone across the surface of the booster.  Rinse booster in water to remove abrasive residue.

Weight: 800 gr. 

Shipping is expensive for this product, comparing to its price, so it is advisable to make combined order, and contact me to update shipping costs

0.00€
Per Page      1 - 13 of 13
  • 1