SET OF 5 ABRASIVE STONES - ELECTRO CORUNDUM

 SET OF 5 SHARPENING STONES, ELECTROCORUNDUM
150х25х10(9) 

High quality sintered electrocorundum (aluminum oxide), ceramic bond, on aluminum blank.  It is far superior  to most analogous products. 
 
Length: 150 mm  
Width:  25 mm 
Height: 10 or 9 mm  

Set includes: 

 1. 150x25x10 - 150 grit   - 125/100 μ - grinding
 2. 150x25x10 - 320 grit   - 50/40 μ - fine grinding
 3. 150x25x10 - 650 grit   - 28/20 μ - polishing
 4. 150x20x9 -  1100 grit  - 20/14 μ - polishing
 5. 150x20x9 -  1500 grit  - 14/10 μ - polishing

How to use electrocorundum stones  
Soak stone in water for 5 minutes.
Moisten the stone with water from time to time to keep suspensions formed on the stone of the required density:
- keep max. concentration of suspension with abrasive grains at the initial stages of sharpening
- remove the suspension from the surface of the stone by the end of polishing.
 
Available on stock 
 
Flatten the stones when necessary with SiC powders, see grain selection table below.

Selection of SiC powders for  dressing  of sharpening stones

Stone	Starting grit	Finishing grit
500/400 μ = 35/40= D501	F16 (1230 μ)	F24 (745 μ)
400/315 μ = 40/45= D426	F16 (1230 μ)	F46 (370 μ)
315/250 μ = 50/60= D301	F24 (745 μ)	F46 (370 μ)
250/200 μ = 60/70= D251	F24 (745 μ)	F60 (260 μ)
200/160 μ = 70/80= D213	F36 (525 μ)	F60 (260 μ)
160/125 μ = 100/120= D151	F46 (370 μ)	F80 (180 μ)
125/100 μ = 120/140= D126	F60 (260 μ)	F100 (129 μ)
100/80 μ = 140/170= D107	F60 (260 μ)	F120 (109 μ)
80/63 μ = 170/200= D91	F80 (180 μ)	F150 (82 μ)
63/50 μ = 230/270= D64	F100 (129 μ)	F180 (69 μ)
50/40 μ = 270/325= D54	F120 (109 μ)	F220 (58 μ)
40/28 μ = 550= M40	F150 (82 μ)	F240 (46 μ)
28/20 μ = 650= M25	F180 (69 μ)	F320 (30 μ)
20/14 μ = 1100= M20	F240 (46 μ)	F400 (18 μ)
14/10 μ = 1500= M16	F320 (30 μ)	F400 (18 μ)
10/7 μ = 1700= M10	F400 (18 μ)	F600 (10 μ)
7/5 μ = 3000= M6.3	F600 (10 μ)	F800 (6,7 μ)
5/3 μ = 4000= M4	F600 (10 μ)	F800 (6,7 μ)
3/2 μ = 6000= M1.5	F800 (6,7 μ)	F1200 (3 μ)
2/1 μ = 10000	F800 (6,7 μ)	F1200 (3 μ)
1/0 μ	F800 (6,7 μ)	F1200 (3 μ)
0.5/0 μ	F800 (6,7 μ)	F1200 (3 μ)

  
Grain size/operation reference chart
30000 grit = 0.5/0 μ - fine polishing
15000 grit = 1/0 μ - fine polishing
10000 grit = 2/1 μ - fine polishing
5000 grit = 3/2 μ - fine polishing
4000 grit = 5/3 μ - polishing
3000 grit = 7/5 μ - polishing
1700 grit = 10/7 μ - polishing
1500 grit = 14/10 μ - polishing
1100 grit = 20/14 μ - polishing
650 grit = 28/20 μ - polishing
550 grit = 40/28 μ - fine grinding
325 grit = 50/40 μ - fine grinding
285 grit = 63/50 μ - fine grinding
240 grit = 80/63 μ - fine grinding
225 grit = 100/80 μ - fine grinding
160 grit = 125/100 μ - grinding
100 grit = 160/125 μ - grinding
80 grit = 200/165 μ - sharpening / rough grinding

 
Free shipping
Contact us for combined shipping  quote or bulk discounts. 

Please read more about: Shipping Warranty, returns and refunds Grain size conversion, selection and use of your tool

• Model: ECST
• Manufacturer: