FR 
DE 
PREMIUM CBN SHARPENING STONES 150-25-5-2 / 150-25-7-3
97 EUR
CBN SHARPENING STONES, CUBIC BORON NITRIDE SHARPENING STONES, CONCENTRATION 200%
150-25-5-2 AND 150-25-7-3
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc.
CBN (cubic boron nitride) is the second-hardest material after diamond, and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.
Length: 150 mm = 6 inch
Width: 25 mm = 1 inch
CBN height: 2 mm = 0.08 inch / 3 mm = 0.12 inch
Total height (with blank): 5 mm = 0.2 inch / 7 mm = 0.28 inch
Recommendations on selection of sharpening stones
How to maintain sharpening stones
Download full catalog
Bonds:
150-25-5-2 - Edge-resistant resin bond BN-130, does not require coolant.
150-25-7-3 - Copper-resin bond BP50, it is as wear-resistant as copper-tin (metal) bond, but softer, does not require coolant.
Grain size: Please select from the list, or read Technical information.
Grain concentration: 200%
Do not waste your money on cheaper stones with lower/unknown concentration.
Flat solid block on aluminum blank.
Available on stock
Application
For knife sharpening using such sharpeners as Hapstone, Edge Pro, Kazak Pro.
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them.
"Stone preparation" is not available because of war.
Selection of SiC powders for dressing of sharpening stones
Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.
Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
Free shipping
Contact us for combined shipping quote or bulk discounts.
150-25-5-2 AND 150-25-7-3
CBN (cubic boron nitride) is a generic name, there are also other names of this material, depending on manufacturer: borazon, elbor, cubonite, etc.
CBN (cubic boron nitride) is the second-hardest material after diamond, and has the best price-performance ratio for processing steels, comparing to other materials, including diamond, silicon carbide or aluminum oxide.
Due to it's high resistance specs, CBN can be used dry without lubricant. This makes CBN the cleanest of the available sharpening stones.
Length: 150 mm = 6 inch
Width: 25 mm = 1 inch
CBN height: 2 mm = 0.08 inch / 3 mm = 0.12 inch
Total height (with blank): 5 mm = 0.2 inch / 7 mm = 0.28 inch
Recommendations on selection of sharpening stones
How to maintain sharpening stones
Download full catalog
Bonds:
150-25-5-2 - Edge-resistant resin bond BN-130, does not require coolant.
150-25-7-3 - Copper-resin bond BP50, it is as wear-resistant as copper-tin (metal) bond, but softer, does not require coolant.
Grain size: Please select from the list, or read Technical information.
The finest grain size is 0.5/0 micron (fine polishing) , the coarsest - 200/160 micron (rough grinding).
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA
In grain selection window you see grain sizes according to standards:
MICRON = MESH(GRIT) = FEPA
Grain concentration: 200%
Do not waste your money on cheaper stones with lower/unknown concentration.
Flat solid block on aluminum blank.
Available on stock
Application
For knife sharpening using such sharpeners as Hapstone, Edge Pro, Kazak Pro.
Stones with grits finer 3 microns either require preparation (dressing), or they will be self-polished after sharpening of 30-50 knives. Then they will be of gold color and work well.
This is common issue for all manufacturers: abrasive grains are covered with bond, so you need to "release" them.
"Stone preparation" is not available because of war.
Selection of SiC powders for dressing of sharpening stones
| Stone | Starting grit | Finishing grit |
| 500/400 μ = 35/40= D501 | F16 (1230 μ) | F24 (745 μ) |
| 400/315 μ = 40/45= D426 | F16 (1230 μ) | F46 (370 μ) |
| 315/250 μ = 50/60= D301 | F24 (745 μ) | F46 (370 μ) |
| 250/200 μ = 60/70= D251 | F24 (745 μ) | F60 (260 μ) |
| 200/160 μ = 70/80= D213 | F36 (525 μ) | F60 (260 μ) |
| 160/125 μ = 100/120= D151 | F46 (370 μ) | F80 (180 μ) |
| 125/100 μ = 120/140= D126 | F60 (260 μ) | F100 (129 μ) |
| 100/80 μ = 140/170= D107 | F60 (260 μ) | F120 (109 μ) |
| 80/63 μ = 170/200= D91 | F80 (180 μ) | F150 (82 μ) |
| 63/50 μ = 230/270= D64 | F100 (129 μ) | F180 (69 μ) |
| 50/40 μ = 270/325= D54 | F120 (109 μ) | F220 (58 μ) |
| 40/28 μ = 550= M40 | F150 (82 μ) | F240 (46 μ) |
| 28/20 μ = 650= M25 | F180 (69 μ) | F320 (30 μ) |
| 20/14 μ = 1100= M20 | F240 (46 μ) | F400 (18 μ) |
| 14/10 μ = 1500= M16 | F320 (30 μ) | F400 (18 μ) |
| 10/7 μ = 1700= M10 | F400 (18 μ) | F600 (10 μ) |
| 7/5 μ = 3000= M6.3 | F600 (10 μ) | F800 (6,7 μ) |
| 5/3 μ = 4000= M4 | F600 (10 μ) | F800 (6,7 μ) |
| 3/2 μ = 6000= M1.5 | F800 (6,7 μ) | F1200 (3 μ) |
| 2/1 μ = 10000 | F800 (6,7 μ) | F1200 (3 μ) |
| 1/0 μ | F800 (6,7 μ) | F1200 (3 μ) |
| 0.5/0 μ | F800 (6,7 μ) | F1200 (3 μ) |
Use and cleaning of CBN sharpening stones
Use any comfortable oil (baby, olive..) to prevent glazing. If glazed - clean with alcohol and toothbrush.
Maintenance (in 1-2 year), flattening/revitalization:
- resin bond stones - with silicon (silica) carbide powders on glass plate,
- metal bond stones - with FeCl.
There are other methods (with SiC powders..), but method with FeCl, on glass plate is the cheapest and simplest.
You may buy 100 gr. of FeCl in grain selection window. I sell it if you buy a stone.
Free shipping
Contact us for combined shipping quote or bulk discounts.
Warranty, returns and refunds Grain size conversion, selection and use of your tool |
- Availability: In Stock
- Model: 150-25-5-2/3
-
Manufacturer:
